The reason for the rubber pad of the plate heat exchanger

In order to let everyone understand this knowledge in more detail, the plate heat Plate Heat Transfer FHC030 exchanger introduces the reasons and solutions for fouling to reduce the negative effects of fouling. The side effect is that the fluid forms a local stagnation to generate dirt accumulation. The calcium and magnesium ions in the medium can easily adhere to the accumulation after precipitation at an appropriate temperature, forming a honeycomb-like scale. It is a place where solid debris and fibers are easy to gather. It can reduce the heat transfer coefficient of the equipment.　　

(2) Plate heat exchangers should not be used in dirty or easy environments (unless other effective measures are added). The plate of the plate heat exchanger is designed with a large number of supporting points, which are designed to disturb the flow of the medium (make the medium flow turbulent to improve the heat transfer coefficient) and pressure support.　　1. It will block the channel. The reason for the rubber pad of the plate heat exchanger: 　　

fouling can cause the heat transfer coefficient of the heat transfer equipment to decrease, and in severe cases, it will block the plate passage.　　 Hope that the introduction of plate heat exchangers can be helpful to you, follow us for more news! If you don’t understand those aspects, you can consult us and we will have professionals to answer you.. The scaling on the plate heat exchanger rubber pads is harmful. This is called scaling.

Second, the solution of the plate heat exchanger rubber pad: 　　 (1) When using unsoftened cooling water as the cooling medium, the operating temperature should be controlled at about 50°C or lower to avoid the sensitive temperature of the precipitation of calcium and magnesium ions in the medium .People who often use plate heat exchangers will find honeycomb-like scales on the equipment